10th gen Moonroof Reset Procedure - 10th Gen Civic Forum
 
Thread Tools
post #1 of 1 (permalink) Old Today, 03:41 PM Thread Starter
Junior Member
 
Join Date: Jul 2019
Posts: 1
10th gen Moonroof Reset Procedure

What is the moonroof reset procedure in 10th gen, I have found below mentioned from driveaccord.net. Has somebody tested any of the methods below on 10th gen. Im having trouble with one click open/ close as well as auto roll down feature has stopped functioning.



Method 1:
TURN THE IGNITION TO THE ON POSITOIN

1. hold the auto open button and keep holding it until 3 seconds after the roof is open.
2. Hold the auto close button and hold until 3 seconds after the roof is closed.

Method 2: Moonroof glass is positioned in the OPEN position (or partially open)
1. Press the moonroof OPEN switch until the moonroof stops in its fully open position.
2. Release the moonroof OPEN switch.
3. Press the moonroof OPEN switch again for about 13 seconds .
NOTE: Keep pressing the switch even though the moonroof motor continues to function.
1. Calibration is complete. The moonroof will automatically move to the regular preset fully open position and come to stop.

Method 3: Moonroof glass is positioned in the TILT position
1. Press the moonroof OPEN switch until the moonroof glass stops in its fully open position.
2. Release the moonroof OPEN switch.
3. Press the moonroof OPEN switch for about 13 seconds .
NOTE: Keep pressing the switch even through the moonroof glass will repeat an inching behavior (moving 40 mm , then stopping for 0.4 seconds )
1. Calibration is complete. The moonroof will automatically move to the regular preset fully open position and come to stop.

Method 4:
1. Close driverís door, leave it closed during the whole procedure.
2. Turn ignition to LOCK (0).
3. Press and hold the tilt switch, and turn ignition to ON (II).
4. Release the tilt switch, and turn ignition to LOCK (0).
5. Repeat steps 3 and 4 four times.
6. Check if the AUTO OPEN and AUTO CLOSE function still work. If they still work, the AUTO functions have not been cleared, go back to step 1. If AUTO functions have been cleared, go to step 7.
7. Press and hold the moonroof open switch for at least 3 additional seconds after the moonroof is fully opened.
8. Press and hold the moonroof close switch for at least 3 additional seconds after the moonrood is fully closed (tilted).
9. Confirm that the moonroof control unit is reset by using the moonroof AUTO OPEN and AUTO CLOSE function.
shah is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the 10th Gen Civic Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome