10th Honda Civic Forum banner
1 - 16 of 16 Posts

· Registered
Joined
·
923 Posts
That'll actually look quite good man. I'm always fond of rocking another set of oem rims, especially bigger ones and those are quite fitting. Still looks original but gives it an oem+ look.

But they'll definitely fit, there's no way you'll have an issue with them
 

· Registered
Joined
·
923 Posts
I doubt it. Being oem spec and the civic not having anything that would make it difficult, i.e a big brake kit, it should be straight on there. The bore would be the same along with bolt patter so it should be good to go
 

· Premium Member
Joined
·
888 Posts
I own a 2016 Accord Sport and was wondering the same thing.Can I swap the wheels from my EX-T on to the Accord without any issues.My wife drives the Accord and could care less about how the wheels look.
 

· Registered
Joined
·
876 Posts
From Civic to Accord there shouldn't be an issue but ultimately you want to check the bolt pattern, center bore size... to see if it will mount on the hub properly and then make sure the size of the wheel will clear the brake caliper and rotor.
 

· Premium Member
Joined
·
888 Posts
I own a 16 Accord Sport with 19 inch wheels and might just try this on my EX-T.The Sport does have larger brakes then the Lower trim models from what I've read though.Id like to compare total wheel circumference between the two.
 

· Registered
Joined
·
1,456 Posts
If the bolt pattern, center bore and all that check out, if you have a jack just take some time and try mounting it to see what happens. Sometimes you'll end up with a small gap between the caliper and barrel of the wheel. can't wait to see how that will look.
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top